EIBENSTOCK EPG 400 A Notice Originale page 15

comes into contact with your eyes, wash them with clean water and
seek medical attention immediately.
Transport of li-ion battery packs:
The shipping of li-ion battery pack is subject to laws related to the
carriage of hazardous goods (UN 3480 and UN 3481). Inform yourself
of the currently valid specifications when shipping li-ion battery packs. If
necessary, consult your freight forwarder. Certified packaging is
available from EIBENSTOCK. Only send the battery pack if the housing
is intact and no fluid is leaking. Remove the battery pack from the
machine for sending. Prevent the contacts from short-circuiting (e.g. by
protecting them with adhesive tape).
Switch the machine off if it stops for whatever reason. This way you
For further safety instructions, please refer to the enclosure!
Initial Operation
Battery pack:
Charge the battery pack before use (1). If performance diminishes,
recharge the battery pack.
The ideal storage temperature is between 10°C and 30°C.
"Li-Power" li-ion battery packs have a capacity and signal indicator: (2)
- Press the button (3), the LEDs indicate the charge level.
- If one LED is flashing, the battery pack is almost flat and must be
recharged.
Removing the battery pack:
Press the battery pack release (4) button and pull the battery pack (1)
forwards.
Inserting the battery pack:
Slide in the battery pack (1) until it engages.
Rotating battery pack:
The rear section of the machine can be rotated 270° in three stages, thus
allowing the machine's shape to be adapted to the working conditions. Only
operate the machine when it is in an engaged position.
Switching on and off
Switching on:
Push the slide switch (5) forward. For continuous activation, now tilt
downwards until it engages.
Switching off:
Press the rear end of the slide switch (5) and release.
In continuous operation, the machine continues running if it is forced
out of your hands. Therefore, always hold the machine with both
15