General Features; Dimensions - Carel thT Mode D'emploi

ThT Thermostat is the CAREL room thermostat that allows users to
control the temperature in residential or light commercial environments,
providing of simplifi ed interface that is ideal for end users. Temperature
set is simple and intuitive, using the knob on the front panel. thT also
allows the user to make some settings, such as the operating mode and
time bands. Compact dimensions and elegant design make it suitable for
all types of rooms, as well as being ideal both as a simplifi ed HMI (Human
Unit Interface) for heat pumps, rooftop units, AHUs, etc. and as zone
controller display for centralised systems.
The RS485 serial connection over Modbus® protocol means architecture
can be implemented in which multiple displays are connected to a
controller to create synergic control logic with programmable controllers.
It can works in stand–alone mode as ambient thermostat or connected
to programmable controllers.
Depending on the model, thT thermostat is fi tted for Flush or Wall
mounting and power supply is 230 Vac.
A temperature sensor is available in all models in order to manage
the comfort in the residential ambient, and a Humidity sensor only on
specifi c models.
thT is compatible with the main fl ush mount distribution boxes available
on the market.
1.1 Models
Codes FLUSH MOUNTING:
THB000AAF0 tht thermostat temperature - fl ush mounting - neutral
version
THB000ACF0 tht thermostat temperature and humidity - fl ush
mounting - neutral version
Codes WALL MOUNTING:
THB000AAW0 tht thermostat temperature - wall mounting - neutral
version
THB000ACW0 tht thermostat temperature and humidity - wall
mounting - neutral version

1. GENERAL FEATURES

1.2 Dimensions

Dimension fl ush mounting
Dimensions of rear part (mm)
Dimension wall mounting
Dimensions of rear part (mm)
Installation warnings
•
These thT thermostats have been designed for wall or fl ush mount
assembly, on distribution boxes compliant with the standards in force;
•
before performing any operations on the thermostat, disconnect the
power supply from the device by switching the main switch on the
electrical panel OFF. Then remove the front part of the thermostat from
the rear to make the electrical connections;
7
86 8 22,55
60
74
143
8
131
83,5
E
"manuale thT" +0300077IE - rel. 1.3 - 11.04.2016
ENG
28
28