Abus IPCB42510A Manuel Utilisateur page 82

7.4.3.5 NAT
Enable UPnP:
UPnP name:
Enable port mapping:
Mapping type:
Manual:
enables or disables the UPnP function. When the UPnP function is
enabled, the network camera can be found on Windows networks.
assigning a UPnP name, which the camera uses to appear on the
network via UPnP.
The NAT (Network Address Translation) or port mapping function
automatically sets up port forwarding for access from the Internet
to the camera in the router (if the router supports this).
Auto: automatic assignment of all ports
manual assignment of all ports
82