IFM Electronic AC5270 Notice D'utilisation page 13

Pneumatics
Circuit diagram pneumatics 1x 5/3-way valve
Compressed air
Adhere to the safety regulations and provisions for the installation of
pneumatic systems. Switch off pressure. Connect the compressed air
supply 1, the operating connections 2 and 4 and if necessary the
exhaust 3 and 5 to the pneumatic system. Cut the connection tube
straight and push it into the tube fitting.
Removal of the tubes
To remove the tube push the grey clamping ring and pull out the tube
at the same time.
Manual override
The pneumatic output can be activated manually using the manual
override (pressing/releasing or pressing/turning/locking).
For trouble-free operation sufficiently treated air must be used.
The electrical triggering has priority over the mechanical trigger-
ing.
13