HQ DIGICHAR100 Mode D'emploi page 4

3. Charging Indication
3.1 When lithium-ion battery polarities are detected and secured, the
blue LED (13) will light up; push (8) forward and press the (10)
cover holder to affix the battery.
3.2 When the charger is powered (9), the green LED (12) will light up.
The charger is powered and ready to charge. When the red LED
(14) or (15) lights up, the installed battery is charging.
Note:
When the battery starts charging, the blue (13) and red (15) LEDs
will be flashing. This is normal during the charging procedure.
3.3 When the red LED of (14) or (15) turns green, it indicates 95%
charging completed; it will then start trickle-charging for additional
30 minutes to reach maximum charge.
4. Lithium-Ion Battery Rapid Charging Mode
Please press "Turbo" rapid charging button (11) on the right side to
activate the "Lithium-ion battery rapid charging" mode, the red LED (15)
will be flashing rapidly. When the rapid charging reaches 70% of battery
capacity, the charger will go automatically into normal charging mode
as shown by red LED (15) which is flashing or the blue LED (13) turns
on. When the red (15) LED turns green, the battery is fully charged.
5. Ni-MH Battery Charging Mode
Insert 2 pieces of AA Ni-MH rechargeable batteries into the battery tray
(19) (when using AAA batteries, use the 2 sleeve adapters), the red
LED (14) will light up. When the red LED (14) turns green, the battery
4