Holiday Mode; Heating Mode - Mitsubishi Electric Ecodan Cylinder unit EHST Série Mode D'emploi

4
Customising Settings for Your Home

Holiday Mode

and thus reduced power usage whilst the property is unoccupied. Holiday mode
Holiday mode can be activated in 2 ways. Both methods will result in the holiday
mode activation screen being shown.
Option 1.
From the main menu screen press button E should be pressed. Be careful not to
hold down button E for too long as this will turn off the controller and system.
Option 2.
From the main menu screen press button F4 the current settings screen will be
displayed. Press button F4 again to access the holiday mode activation screen.
Once the holiday mode activation screen is displayed you can activate/deactivate
and select the duration that you would like holiday mode to run for.
• Press button F1 to activate or deactivate holiday mode
• Use buttons F2, F3 and F4 to input the date which you would like holiday
mode to activate or deactivate holiday mode for space heating.
<Editing holiday mode>
be altered you should contact your installer.

Heating Mode

The heating menu deal with space heating using normally either a radiator or
There are 3 heating modes
• Room temp (Auto adaptation) (
• Flow temp ( )
• Compensation curve ( )
This mode is explained in detail in 'Overview of Controls' Section.
<Flow temp mode>
best suit the space heating system design, and user's desired requirements.
<Explanation of compensation curve mode>
During late spring and summer usually the demand for space heating is reduced.
and reduce running costs.
space heating circuit dependent on the outdoor temperature. The FTC3 uses
information from both an outdoor temperature sensor and a temperature sensor
on the primary circuit supply to ensure the heat pump is not producing excessive
Your installer will set the parameters of the graph depending on local conditions
and type of space heating used in your home. It should not be necessary for you
riod the space heating is not heating or is overheating your home, please contact
your installer so they can check your system for any problems and update these
settings if necessary.
)
-
10