Receive Mode; Station Preset Memory; Auto Memory Entry; Preset Tuning - Kenwood KCA-CM50 Mode D'emploi

HD Radio tuner features

Receive Mode

Sets the receive mode.
Press the [MODE] button.
Each time the button is pressed the Receive mode switches as
shown below.
Receive mode Display
Auto mode "Auto"
Digital "Digital"
Analog "Analog" Analog broadcasts only.
• Even in the "Auto" setting, an analog broadcast will be received
during the reception of a ball game mode (non-delayed broadcast
program).
• When this button is pressed once, the current Receive Mode is
displayed. When it is pressed again, the Receive Mode is
switched over to another.

Station Preset Memory

Putting the station in the memory.
1
Select the band
Press the [u] or [d] button.
2
Select the frequency to put in the memory
Press the [4] or [¢] button.
3
Put the frequency in the memory
Press the desired [#1] — [#6] button for at least 2 seconds.
The preset number display blinks.
Operation
Analog broadcasts and digital
broadcasts will be switched
automatically. When both are being
transmitted, the digital broadcast will
have priority.
Digital broadcasts only.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.

Auto Memory Entry

Putting a station with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Press the [u] or [d] button.
2
Open Auto Memory Entry
Press the [MODE] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
The receiving method can be switched with the setting of <Receive
Mode>.

Preset Tuning

Calling up the stations in the memory.
1
Select the band
Press the [u] or [d] button.
2
Call up the station
Press the desired [#1] — [#6] button.
When the preset broadcast station is transmitting either an analog
broadcast or a digital broadcast, the sound will not be output unless
the broadcast mode matches the setting of <Receive Mode>.
— 8 —