Sirius Id (Esn) Display; Auto Memory Entry; Switching Seek Mode; Receive Mode Setting - Kenwood KOS-A200 Mode D'emploi

Menu system
In SIRIUS tuner mode

SIRIUS ID (ESN) display

Displaying the SIRIUS ID (Electronic Serial
Number).
Display
"ESN = ************"
• Serial & SIRIUS ID (ESN)
It is important to retain the unit serial number and
the electronic SIRIUS Identification number for service
activation and potential service changes.
In HD Radio /DAB mode

Auto Memory Entry

Putting stations with good reception in the
memory automatically.
1
Select the Auto memory Entry mode
Press the [5] or [∞] button.
Select the "A-MEMORY" display.
2
Enter Auto memory Entry mode
Press the [OK] button.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
In SIRIUS tuner/HD Radio/DAB mode

Switching Seek Mode

Sets the seeking mode.
1
Select the Seek mode
Press the [5] or [∞] button.
Select the "SEEK SEL" display.
2
Set the Seek mode
Press the [4] or [¢] button.
Each time you press the button, the Seek mode
alternates between the operations shown in the
table below.
In SIRIUS tuner source
Display Operation
"CHANNEL" Normal manual seeking control.
"PRESET" Search in order of the channels in the Preset
memory.
24
|
English
In HD Radio source
Tuning mode Display
Auto seek "AUTO1"
Preset station "AUTO2"
seek
Manual "MANUAL"
In DAB source
Tuning mode Display
Auto Ensemble "AUTO1"
Seek
Preset Service "AUTO2"
Recall
Manual "MANUAL"
In HD Radio mode

Receive mode Setting

Sets the receive mode.
1
Select the Receive mode
Press the [5] or [∞] button.
Select the "HDR MODE" display.
2
Enter Receive mode
Press the [OK] button.
3
Set the Receive mode
Press the [5] or [∞] button.
Each time you press the button, the Receive
mode alternates between the modes shown in
the table below.
Receive mode Display
Auto mode "AUTO"
Digital "DIGITAL"
Analog "ANALOG"
4
Exit Receive mode
Press the [MENU] button.
Operation
Automatic search for a station.
Search in order of the stations in the
Preset memory.
Normal manual tuning control.
Operation
An Ensemble in good receiving
condition can be selected and
received.
Services registered can be recalled in
the order of the Pre-set number.
Channels are switched one after
another.
Operation
Analog broadcasts and digital
broadcasts will be switched
automatically.
When both are being transmitted,
the digital broadcast will have
priority.
Digital broadcasts only.
Analog broadcasts only.