Specifications; Usb - Toyota USB & iPod Mode D'emploi

11. Specifications

USB & iPod Integration kit ECU:
Power supply:
Max. current consumption:
Max. standby current:
Dimensions ECU:
Weight ECU:
Max. Audio output:
Max. Audio output impedance:

11.1. USB

USB spec: USB 2.0 FS (12 MBPS), Mass Storage class (BOT method)
(*in case of doubts contact your retailer or device manufacturer to check compliance with USB
storage mass class)
Max current supply: 500 mA (*Most external hard drives consumption is over this value)
Number of File and Folder:
• Total number of Folders in device: MAX 999
• Total number of Files in device: MAX 65,025
• Total number of Files in a Folder: MAX 255
• Levels of Folder: 8 Levels
MP
• MPEG1 AUDIO LAYER II, III (VBR is supported.)
Bit rate: 2 - 20 kbps sampling frequency: 44.1/48/2 kHz
• MPEG2 AUDIO LAYER II, III (VBR is supported.)
Bit rate: 2 - 160 kbps sampling frequency: 22.05/24/16 kHz
• MPEG 2.5 (VBR is supported.)
Bit rate: 2 - 160 kbps sampling frequency:11.025/12/8 kHz
WMA
• Ver9 (standard, VBR) HIGH PROFILE
Bit rate: 2 - 20 kbps, sampling freq: 44.1 k/48 k/2 kHz
• Device charging is supported up to max current supply
DC 1.2 V (10.5 V - 16 V)
< 1 A
< 1 mA
125.5 mm (W) x 7.5 mm (H) x 117.5 mm (D)
0.6 kg
2 VRMS
220 Ohms
A
USB & iPod integration kit
®