10. Resetting
Under special conditions software glitches may occasionally occur and your USB mass storage
device or iPod may lock up. There are several steps to reset the Integration kit and Media Devices
without affecting their contents and settings:
Switch the radio OFF/ON.
If the problem is not solved:
Disconnect and reconnect USB mass storage device/iPod from the USB/AUX jack. Check that the
plug is in perfect condition.
If the problem is not solved, disconnect the USB mass storage device/iPod and:
Turn the ignition key to OFF during one minute and switch again to on. Reconnect the iPod.
If the problem is not solved, disconnect USB mass storage device/iPod, turn ignition to OFF and
Reset your USB mass storage device/iPod. (Refer to their user manual).
A
2
USB & iPod
integration kit
®