Agilent Technologies 729-0800 Mode D'emploi page 57

Figure 7 Posizionamento batteria
1.
2.
3.
4.
5.
Ion Pump Battery Power Supply / 87-900-111-01 (E)
Check that the ON/OFF switch is set to OFF.
Back off the 4 screws A.
Open the cover of the unit.
Remove the strip of Mylar inserted between the terminals of the
battery C and the contacts of the battery-holder.
Replace the cover of the unit and re-insert the four screws A.
Instructions for Use
Installation
57/68
4