Resetting The System - Insignia NS-A2111 Guide De L'utilisateur

- OR -
If you are playing a VCD, press PROGRAM. The VCD program
playback screen opens.
Note
2 Enter numbers using the number buttons on the remote control,
and use the arrow buttons to move the cursor.
3 When you are done entering the numbers, press the arrow buttons
to move the cursor to PLAY, then press ENTER. The program
plays.
Selecting external audio input
To select an external audio source:
• After connecting external sound source components to your
system, you can press AUDIO IN to select either Audio 1 or
Audio 2 to select those components as your audio source.

Resetting the system

To reset the system and return all settings to default values:
• Press RESET. The system returns all settings to their original
(default) values.
Main-channel tone adjustment
To adjust the audio tone:
• While listening to any audio source, adjust the bass or treble by
pressing BAS+/- or TRE +/- on the remote control.
20
If the player is in PBC ON mode, pressing PROGRAM turns
off PBC, then proceeds to the programming screens.
www.insignia-products.com
Welcome