Handling And Operation; Filling The Water Tank; Filling The Milk Tank - Beem 07440 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

27

Handling and Operation

Inserting the Drip Tray
The device is supplied with a drip tray (12) to capture any excess water produced after or during
the brewing process. In addition, coffee might drip out of the coffee outlet (11) or milk might drip
out of the milk nozzle (4) after making coffee.
Only attach the drip tray to the device / remove it from the device when the milk tank (6)
is not inserted in the device.
1. Place the cover (13) on the drip tray. Make sure that it fi ts correctly.
2. Place the drip tray on the surface and slide it into the device at the designated point.

Filling the Water Tank

1. Open the water tank lid (18).
2. Take out the water tank (16) by the handle.
3. Pour the quantity of water you want (note the MAX marking) into the water tank. Only ever
use water to make coffee; do not pour milk or other liquids into the water tank!
4. Reinsert the water tank and fl ip the handle down (Picture C). Make sure that the water tank
fi ts correctly.
5. Close the water tank lid.
If the water in the water tank is not used within two days, pour away the remaining water
and refi ll the water tank before you use it again.

Filling the Milk Tank

1. Press the release button (1) and pull the milk tank (6) to the side at the same time. Do not
exert any pressure on the device from above as otherwise the milk tank might become
jammed.
2. Press the release button on the side of the milk tank cover to open it up at the side and
remove it.
3. Pour the quantity of milk you want (note the MAX marking) into the milk tank. Only ever
pour milk or water for cleaning into the milk tank.
4. Place the milk tank cover onto the milk tank at an angle and fl ip it shut (Picture D). When you
do this, make sure that the locking lugs sit in the recesses which are provided for them. The
cover must be heard to engage in place.
5. Insert the milk tank back in the device. It must engage audibly. Check that the milk tank fi ts
correctly.
If the milk in the milk tank is not used up, pour away the remaining milk and clean the milk
tank. Refi ll the milk tank before using it again.
07440_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 27
07440_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 27
EN
21.06.2021 10:50:10
21.06.2021 10:50:10

Publicité

Table des Matières
loading

Table des Matières