Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Technical specifications - Primo 3
Intended use: outdoors
ƒ
ƒ
between -5 °C and + 40 °C
ƒ
L x w x h: 125 x 66 x 105 cm
ƒ
L x w x h (without seat): 125 x 66 x 88 cm
ƒ
Weight without batteries (with 60 Ah battery): 75 kg
(110 kg)
ƒ
Weight of heaviest to dismantle component (seat):
15 kg
Maximum static stability down slope, up slope and
ƒ
sideways up slope: 9 º
Maximum dynamic stability up slope: 6 º
ƒ
ƒ
Maximum safe slope angle: 6 º
ƒ
Max. driving distance with fully-charged batteries*:
25 miles (30 km) (45 Ah)/31 miles (40 km) (60 Ah)
ƒ
Maximum obstacle height: 10 cm
ƒ
Maximum obstacle to drive off (pavement): 10 cm
ƒ
Max. (programmable) speed: HI = 7,5 mph (12 km/h),
LO = 4 mph (6 km/h). Less is possible.
Seat depth: 44 cm
ƒ
Seat width: 48 cm
ƒ
Seat height above footrest (min. - max.): 42.5 - 45 -
ƒ
47.5 - 50 cm
ƒ
Height of footrest above ground: 17 cm
ƒ
Turning circle (radius): 120 cm
ƒ
Max. user weight: 160 kg
ƒ
Battery capacity (optional): 45/60** Ah
ƒ
Max. load: 8 amps
Motor, transaxle: 500 watts 24 V
ƒ
Magnetic brake: 8 Nm 24 V
ƒ
Wheel size: 4.10/3.50 – 6"
ƒ
Complies with: EN 12184 Class B
ƒ
GB12
* Depending on the
set speed, outside
temperature, weight of
the user, tyre pressure,
etc.
** Gel batteries
Technical specifications - Primo 3
Lights
ƒ
Headlight, rear light, brake lights, indicator:
24V/5W
The mobility scooter has 2 12-volt dry (MK) batteries.
The following types are suitable:
ƒ
45 Ah (198 x 166 x 171 mm) AGM
60 Ah (259 x 169 x 178 mm) Gel
ƒ
If a different battery is used than supplied, the
following dimensions are the maximum external
measurements:
ƒ
278 x 175 x 190 mm
ƒ
261 x 135 x 230 mm
ƒ
238 x 140 x 235 mm
Test specifications
The scooter meets the following standards: ISO
ƒ
7176- 8,9,14,16
Requirements and testing methods for static,
ƒ
shock and fatigue strength: ISO 7176-8
ƒ
Climate test for scooters: ISO 7176-9
ƒ
Propulsion and steering systems for scooters: ISO
7176-14
ƒ
Requirements for resistance to ignition: ISO 7176-16
Service and technical support
Contact your supplier if you have any questions
regarding specific settings, maintenance or repairs.
Always have the serial number ready. You can find
these on the mobility scooter's CE sticker (see also
page 20).
GB13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Primo 3Primo 4

Table des Matières