Seat Width Setting; Backrest Angle Setting - Handicare You-Q E-QLASS Manuel D'utilisation

4.2

Seat width setting

Seat width setting by armrests (fig
4.3).
1. Loosen the bolts.
2. Slide the armrest in the desired
position.
3. Tighten the bolts.
Seat width setting by legrests (fig 4.4).
1. Loosen the bolts.
2. Slide the legrests in the desired
position.
3. Tighten the bolts.
4.3

Backrest angle setting

See figure 4.5
1. Loosen the bolts on both sides.
2. Set the desired angle of the
backrest.
3. Tighten the bolts.
25
Figure 4.3
Figure 4.4
Figure 4.5