Technical Specifications - Beta 3035 Mode D'emploi

EN
INSTRUCTIONS FOR USE
TYRE LIFTER ITEM 3035

TECHNICAL SPECIFICATIONS

Maximum lifting capacity: 200 kg
Useful loading height: 1.60 m
Forks adjustable in 2 positions
PARTS:
● 2 fork rotating frames
● 2 wheels Ø 260 mm
● 2 nylon wheel shims
● 2 wheel locking studs
● 2 forks
● Assembly screws M8
● Pin locking connectors
● Fork rotating frame return springs
TYRE LIFTER ASSEMBLY
Step 1
Fit the nylon shims onto the load bearing shaft, place the anti-perforation rubber wheels and lock
them by means of the studs.
Use a rubber hammer to fit in the shims correctly.
Now the lifter can be placed on the ground, with the frame open at an angle of 45°.
Step 1
5