Assembly And Installation Instructions; Care And Maintenance Instructions - EXIT Toys Rapido Mode D'emploi

3.0 Assembly and Installation Instructions

• Adequate overhead clearance is essential. Provide clearance for wires, tree limbs,
and other possible hazards.
• Lateral clearance is essential. Place the Rapido away from walls, structures,
fences, and other play areas. Maintain a clear space on all sides of the Rapido. A
minimum of 3m from frame edge is recommended.
• Never set-up the Rapido in heavy rain, wind or storm conditions, especially
storms.
• When moving the assembled Rapido, have at least two people evenly the frame
to lift the Rapido off the ground.
• Place the Rapido on a level surface before use.
• Secure the Rapido against unauthorized and unsupervised use.

4.0 Care and Maintenance Instructions

Inspect the Rapido before each use and replace any worn, defective, or missing parts.
The following conditions could present potential hazards:
1. Missing, improperly positioned, or insecurely attached parts.
2. Punctures, frays, tears, or holes worn in the mesh.
3. A bent or broken frame or support system.
4. Sharp protrusions on the frame or suspension.
5. Loosened or missing hardware, system.
6
MST-41111 -V01