Mettler Toledo BTA221-555E Manuel Utilisateur page 8

8
User Manual BTA221
METTLER TOLEDO
Adjust the Control Lever
On the handle of the pallet truck scale, you will find the
control lever, which can be set in one of three positions:
LOWER: to lower the forks; NEUTRAL: to move the scale;
ASCENT: to raise the forks
After mounting the handle, adjust the different positions of
the lever as follows:
1.
Adjust the setting screw (see figure 5, 140H) on the
crank link until the LOWER position function works.
2. If the forks elevate while pumping in the NEUTRAL posi-
tion, turn the setting screw clockwise until pumping does
not elevate the forks anymore.
3.
If the forks descend while pumping in the NEUTRAL
position, turn the setting screw counter-clockwise until
pumping does not lower the forks anymore.
4. If the forks do not descend when the control lever is in
the LOWER position, turn the setting screw clockwise,
until raising the control lever lowers the forks.
5.
If the forks do not lift while pumping in the ASCENT posi-
tion, turn the setting screw counter-clockwise until the
forks elevate while pumping in the ASCENT position.
6. Secure the setting screw by tightening the setting screw
nut (see figure 5, 140H and 141).
Figure 5
Order number 72244520 08/10