4
4.1
4.2
14
User Manual BTA221
METTLER TOLEDO
Terminal Operator Menu
The operator menu consists of the following blocks:
F2 – F key menu settings
F3 – Terminal menu settings
F4 – Communication menu settings- Not Applicable for BTA221
F6 – Exit menu
Entering the Operator Menu
-> In gross mode, press and hold
-> Enter pass word
SEtUP appears.
-> Press
.
F2 appears.
Operating the Menu
Keys and their function in the menu
Selecting next parameter.
Back to the previous parameter.
Confirming selection.
Back to the previous menu item.
Back to the next higher menu item.
Numeric entry
1. Press
for editing the displayed value.
The (last) digit will blink.
2. Increase the displayed digit using the
– or –
Decrease the displayed digit using the
3. When entering multi-digit numbers, use the
the cursor one place to the left.
4. Change the digit as described in step B.
5. Repeat steps 3 and 4 if necessary.
6. When all digits are entered, use the
entry.
Note: With
, you can clear the entry.
until MAStEr appears.
and confirm with
.
key.
key.
key to move
key to confirm the
Order number 72244520
08/10