General Guide To Safe Operation - Mettler Toledo BTA221-555E Manuel Utilisateur

2.2
Do not use Pallet Truck
Scale this way:
10
User Manual BTA221
METTLER TOLEDO

General Guide to Safe Operation

To operate the pallet truck scale safely, please read all
▲
warnings and instructions prior to use.
Do not operate the unit unless you are familiar with it and
▲
have been trained or authorized to do so.
Do not operate the unit until you are convinced that it is
▲
in good condition. Pay special attention to the condition
of the wheels, the handle assembly, the forks and the
control lever.
Do not use the unit on sloping ground.
▲
Never place any part of your body in the lifting mecha-
▲
nism or under the forks or load. Do not carry pas-
sengers.
We advise that operators wear gloves and safety shoes
▲
at all times.
Do not handle unstable or loosely stacked loads.
▲
Do not overload the unit.
▲
Always place loads centrally across the forks and not at
▲
the end of the forks (see figure below).
Make sure that length of the forks matches the length
▲
of the pallet.
Lower the forks to their lowest height when the unit is
▲
not being used.
In other specific conditions, the operators should take
▲
extra care in operating the truck
Only use the Pallet Truck
Scale this way:
Order number 72244520 08/10