Product Description; Control Panel - airnaturel Polair Notice D'utilisation

PRODUCT DESCRIPTION

The air cooler Polair enable to cool down your room with a enjoyable temperature. The pump
system soaks the evaporating filter with the cold tank's water. The water content on this filter is
distributed on the room thanks to the ventilating system. In function the evaporating air cooler
humidify the ambient air. Avoid an excessive humidity. We recommend humidity in a room
between 45 and 55%. (An excessive humidity can cause health problems and damage your
habitation).
This product could be use like a classic fan or like an air cooler in activating the COOL function.
COOL FONCTION
Before using the product avoid unplugging the product and placing it upright.
FILL THE TANK :
1. Push the tank and fill it with cold water. Be away that the water level is between the min
and max marks.
2. The ice box could be placed into the tank for a better cold air flow. Before using it place it
4 hours in the freezer.
3. Push the tank into the product.
In cool mode the product couldn't be use without the filters. Be away that the filters are
dry and well installed.
4. Plug the product into a 230V-240V~A.C. electrical outlet.
5. Press the COOL button for starting the cool mode.
Don't pull the tank when the cool function are activated.
Condensation can be seeing on the floor with a use of the ice box. Please use Polair on
water resistant floor.
If you don't use the product or the cool function, empty the tank and dry the principal filter to
avoid any bacteria growth.

CONTROL PANEL

2
1
3 4 5 6
a c e
b d
h
f g
9