Monacor TXA-1802CD Mode D'emploi page 9

Control element
on the
remote control

on the player

Continuous repeat / ID3 tag feature
9
to switch between:
– repeat of the title ("REP1")
– repeat of the folder ("REP1 F")*
REP/ID3
– repeat of all titles ("ALL")
✅
– no repeat
To activate the ID3 tag feature*, keep
the button pressed for 2 seconds during
the replay: File name ("FILE"), title name
("TITLE"), artist ("ARTIST") and album
("ALBUM") will scroll through the dis-
play. To deactivate the feature, keep the
button pressed again for 2 seconds. The
ID3
✅
REPEAT
feature will automatically be deactivated
when the next title is reached or when a
button is pressed.
* for MP3 media only
Continuous random replay /
10
Confirming the title selection
to replay all titles in random order
("RAN"): on / off
RAN/ENT.
✅
to confirm the title selection:
see position ⑪
to replay all titles in random order
✅
RAN
("RAN"): on /off
ENTER to confirm the title selection:
✅
see positions ⑪ and ⑭
Programming a title sequence
11
1. Press PROG ("PROG" will be
indicated).
2. Select the first title:
– press
PROGRAM
✅
PROG
or
– use the numerical keys to enter the
and press RAN / ENT. or ENTER to
confirm the title selection.
3. Proceed in the same way to program
all other titles (10 max.).
4. Press
("MEMO" will be indicated).
5. Press PROG to return to the normal
replay mode: the title sequence will
be deleted.
If no repeat function has been activated
✅
PROG
("REP1" and "ALL" are available), the
player will stop when the title sequence
has been replayed and the title sequence
will be deleted.
* for MP3 media with several folders:
The number of the title on the medium,
not the number in the folder!
All rights reserved by MONACOR
in any form or by any means for any commercial use.
Function
/ to go to the title;
select the folder before selecting
the title, if required
title number*
to start the title sequence
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be reproduced
®
Control element
on the
remote control

on the player

Muting the sound
12
MUTE
✅
to mute / unmute the sound
✅
Changing the speed (and the pitch)
13
HI(GH): to increase the speed in 10 steps
LOW: to reduce the speed in 10 steps
SPEED
✅
NOR: to return to normal speed
LOW NOR HI
Press HI(GH) or LOW repeatedly until the
desired speed is reached. The display will
briefly indicate the setting, e. g.
SPEED
✅
LOW NOR HIGH
Selecting a title via the title number
14
Enter the title number* and press
ENTER to confirm.
✅
1 0
...
* for MP3 media with several folders:
The number of the title on the medium,
not the number in the folder!
Repeating a section within a title
15
(continuous loop)
Press the button at the start and at the
end of the section.
✅
A B
To exit the loop, press the button once
again.
MEMO REP1 ALL RAN PROG F
A→B
M3
CD
MP3 Media "M3"
Replay / Pause :
number of the title in the
folder and time played of the
title (keeps flashing in the
pause mode)
When the player is stopped:
number of folders and titles
M3
e. g.
10 folders, 57 titles
"REP1" repeat of the title
"REP1 F" repeat of the folder
"ALL" repeat of all titles
"RAN" random replay
"A→B" starts flashing when the start of a loop has been
defined and is always indicated while the loop is replayed
"PROG" while a title sequence is programmed,
"MEMO" while the title sequence is replayed
Subject to technical modification .
Function
normal speed
increased by 5 steps
normal speed
reduced by 2 steps
Display
Audio CDs "CD"
Replay / Pause :
number of the title and time
played of the title (keeps
flashing in the pause mode)
When the player is stopped:
number of titles
MEMO REP1 ALL RAN PROG F
A→B
M3
CD
e. g.
20 titles
9