Oven Telescopic Racks - FULGOR 700 Série Guide D'utilisation Et D'entretien

2. Lift rack up at front and then remove it
To replace an oven rack:
1. Place rear of rack between rack level guides
2. While lifting front of rack, slide rack in all the way while
lowering the front

Oven Telescopic Racks

• The extendable rack allows for easier access to cooking
foods. It extends beyond the standard flat rack bringing the
food closer to the user.
CAUTION
When the rack is outside of the oven, slide arms do not
lock. They could unexpectedly extend if the rack is carried
incorrectly. Extending slide arms could cause injury. Rack
should only be held or carried by grasping the sides.
NOTE: Always remove the extendable rack before self-
cleaning the oven.
CAUTION
To avoid burns, pull rack all the way out and lift pan above
handle when transferring food to and from oven.
Please refer to illustration on Page 5 if there is any question
as to which side is the front of the rack.
8 - General Oven Tips
To remove extendable rack from the oven:
1. Lift of rack slightly and push it towards the back of the oven
until the stop releases.
2. Raise back of rack until frame and stop clear rack guide
3. Pull rack down and out
To replace an extendable rack:
1. Grasp rack firmly on both sides. Place rack (including
frame) above desired rack guide
2. Push all the way in until the back of the rack drops into place
3. Pull both sections forward until stops activate. Rack should
be straight and flat, not crooked
EN
11