Assembling Instructions; Operation; Removing / Inserting The Battery; Turning On And Off - Deltafox DG-CLB 1821 Traduction De La Notice D'utilisation Originale

GB
Observe the safety information
and notes on charging and pro-
per use as shown in the instruc-
tion manual for your battery and
charger. A detailed description
of the charging process and fur-
ther information can be found in
the separate operating instruc-
tions.

Assembling instructions

Do not insert the battery until
the appliance is fully assembled.
Risk of injury!
Unit assembly:
Slide the blower pipe (1) onto the connec-
tor nozzle (2) on the motor housing (4)
until it locks into place. In order to attach
the blower pipe (1), the locking button (3)
must be pressed down. There is a distinct,
audible clicking sound when the blower
pipe has attached to the locking button.

Operation

Please observe local regulations
concerning noise protection.
Removing / inserting the
battery
1. To remove the battery (7) from
the appliance, press the release
button (9) on the battery and pull
out the battery.
2. To insert the battery (7), place
it on the guide track and push
it back into the appliance. It will
audibly snap in.
54
Do not insert the battery until
the appliance is fully assembled.
Risk of injury!

Turning on and off

Ensure you are standing solidly and
hold the device firmly and away
from your body. Before switching
the device on, ensure it is not in
contact with any objects.
1. Check that the battery (7) is in
(see "Removing/Inserting the bat-
tery").
2. Press the on/off switch (5) to start
the device.
3. To turn it off, release the on/off
switch (5). The device cannot be
switched to continuous operation.

Working with the appliance

Only use the device when the
blower pipe is attached!
• You get optimal results when you use
the blower with a separation distance
to the ground of 5 -10 cm.
• Direct the airstream away from your-
self. Ensure that you do not to stir up
any heavy objects and hurt somebody
or damage something.
• Before blowing, loosen leaves adher-
ing to the ground with a broom or rake.
• In very dry conditions, lightly moisten the
surface, to reduce the build-up of dust.