Safety Instructions; Symbols - Deltafox DG-CGC 1080 Set 3in1 Traduction De La Notice D'utilisation Originale

Grass-trimming blade
Blade width............................... 100 mm
Sound pressure level
(L ) ................ 68.8 dB(A), K
pA
Sound power level (L
measured ........77.5 dB(A); K
Shrub-trimming blade
Cutting length .......................... 160 mm
Distance between teeth... approx. 8 mm
Sound pressure level
(L ) ................ 67.1 dB(A), K
pA
Sound power level (L
measured ........78.6 dB(A); K
Spray attachment
Volume ......................................1000 ml
Sound pressure level
(L ) .................... 71.7 dB(A), K
pA
Sound power level (L
measured ......83.6 dB(A); K
The noise and vibration levels have been
calculated according to the norms stated in
the conformity statement.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
= 3 dB
pA
)
WA
= 3 dB
WA
= 3 dB
pA
)
WA
= 3 dB
WA
= 3 dB
pA
)
WA
= 2.77 dB
WA
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).

Safety Instructions

This unit can cause serious in-
jury if not used correctly. Before
using the unit, carefully read
through the instruction manual
and familiarise yourself with all
of its controls.

Symbols

Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
There is a risk of injury from
electric shock.
Instruction symbols with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.
Symbols on the unit
Before using for the first time, care-
fully read through the user manual.
Attention!
Remember that the cutting equip-
ment will continue to move after
switching the unit off.
GB
63