Care And Maintenance - Hilti TE 60-A36 Notice D'utilisation Originale

Perforateur-burineur
Masquer les pouces Voir aussi pour TE 60-A36:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.2.2 Drilling without hammer action
Drilling without hammering action is possible when accessory tools with
a special connection end are used. Accessory tools of this kind are
available from Hilti. Alternatively, when the keyless quick-release chuck
is fitted, smooth-shank drill bits for wood or steel, for example, can be
used to drill without hammering.
▶ Set the function selector switch to this symbol:
5.3 Chisel positioning
CAUTION
Risk of injury! Loss of control over the chisel direction.
▶ Do not operate the tool when the selector switch is set to "Chisel
positioning". Turn the function selector switch until it engages in the
"Chiseling" position.
The chisel can be set to 24 different positions (in 15° increments). This
ensures that flat chisels and shaped chisels can always be set to the
optimum working position.
1. Set the function selector switch to the "Chisel positioning" position
2. Turn the chisel to the desired position.
3. Set the function selector switch to this symbol:
▶ The product is ready for use.
5.3.1 Chiseling
▶ Set the function selector switch to the "Chiseling" position
5.3.2 Switch sustained operation on and off
When chiseling, the control switch can be locked in the "on" position.
1. Push the lockbutton for continuous operation forward.
2. Press the control switch fully.
▶ The product then runs in sustained operating mode.
3. Push the lockbutton for continuous operation back.
▶ The product switches off.
6

Care and maintenance

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
*2201899*
7
2201899
.
until it engages.
8
English
.
.
13

Publicité

Table des Matières
loading

Table des Matières