Safety Precautions - Zibro S 32 Série Manuel D'installation

SAFETY PRECAUTIONS

The following should be always observed for safety:
WARNING
Do not install it yourself.
Install the unit securely in a place which can bear the weight of the unit.
Use the specified electrical wires to connect the indoor and outdoor units securely and attach the
wires firmly to the terminal board connecting sections so the stress of the wires is not applied to
the sections.
Be sure to use the provided or specified parts for the installation work.
Perform the installation securely referring to the installation instruction.
Perform electrical work according to the installation manual and be sure to use an
exclusive circuit.
Check that the refrigerant gas does not leak during installation or after installation is completed.
Attach the electrical part cover to the indoor unit and the service panel to the outdoor unit
securely.
4
84