Sony NT-2 Mode D'emploi page 13

Masquer les pouces Voir aussi pour NT-2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4
While pressing the red button on REC, slide REC.
Recording starts.
This unit adjust the recording level automatically.
To stop recording
Press p.
To suspend recording
Press P . "PAUSE" and the tape counter
appear in the display alternately. To
resume recording, press P again.
To adjust the recording level
Recording level adjustment mode has
been preset to SPEECH. To change the
mode to MUSIC or adjust the recording
level manually, refer to "Adjusting the
recording level" (page 15).
To start recording quickly
After finishing step 3, slide REC while
pressing the red button after pressing P.
The recorder enters recording standby
mode. When you want to start
recording, press P.
When you set DIR MODE (direction
mode) to a (both sides)
You can play the tape recorded with the
NT-2 smoothly without a break when
the tape changes from the FWD
(forward) side to the REV (reverse) side
("Memory reverse function", page 34).
If you start recording less than 10
minutes before the end of the FWD side,
"memory reverse" may not function.
13
-EN

Publicité

Table des Matières
loading

Table des Matières