Safety Instructions; User Manual - Toolland AC06 Mode D'emploi

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland! Please read the manual thoroughly before bringing
this device into service. If the device was damaged in transit, do not install or use it and
contact your dealer.
2.

Safety Instructions

Read and understand this manual and all safety
signs before using this appliance.
Indoor use only.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid
hazard.
The battery terminal not connected to the chassis
has to be connected first. The other connection is
to be made to the chassis, remote from the
battery and fuel line. The battery charger is then
to be connected to the mains supply.
After charging, disconnect the battery charger
from the mains supply. Then remove the chassis
connection and then the battery connection.
Warning: Never recharge non-rechargeable
batteries.
V. 06 – 03/12/2020
AC06

USER MANUAL

3 ©Velleman nv