Toolland AC06 Mode D'emploi page 5

Do not crimp the power cord or leads and
•
protect them against damage. Have an
authorised dealer replace it if necessary.
Do not use the device when damage to
•
housing or cables is noticed. Do not attempt to
service the device yourself but contact an
authorised dealer.
Note that damage caused by user
•
modifications to the device is not covered by
the warranty.
Do not try to open the housing of the battery
•
or battery charger.
Do not expose the battery and charger to full
•
sunlight or high temperatures.
Acid may start to boil. This is not unusual, but
•
in order to prevent accidents switch off the
charger and let the battery cool down. Acid
gases are toxic. Do not inhale!
Charging has to take place in a well-ventilated
•
area.
Charging batteries with a higher capacity may
•
damage the charger.
Always handle batteries with care.
•
When smoke or stench from scorched
•
insulation is noticed, immediately unplug the
charger from the mains.
There are no user-serviceable parts in the
•
charger. Contact your dealer for spare parts if
necessary.
V. 06 – 03/12/2020
AC06
5 ©Velleman nv