Specification - Soundastic Ultimate Notice De Montage Et D'utilisation

IX. Specification
Non-linearity within the 10 – 30 000 Hz band:
Weighted signal - noise interval:
Power supply voltage filtering capacitors:
The Ultimate amplifier meets all the requirements and standards binding within the EU
19
Sinusoidal power:
Minimum impedance load:
Output impedance:
Distortions – THD:
Bandwidth:
„Slew rate":
Dynamics:
Inputs:
Output:
Input sensitivity:
Input impedance:
Volume potentiometer:
Grid transformers:
Advanced protection system:
Remote control:
Power consumption:
Net weight:
Dimensions :
Manufacturer's warranty:
2 x 250 W/8 Ω (CLASS AB) / 2 x 400 W/4 Ω (CLASS AB)
1 Ω (temporary)
0.20Ω
0.05% at the power of 1 W/8Ω / 0.015% at the power of 245 W / 8Ω
3 Hz – 100 kHz – 3 dB / 1 W / 8Ω
± 0.01 dB
200 V/μs
135 dB
130 dB (IHF – A)
5 x universal – RCA, XLR Amphenol, separated CD / DAC – RCA WBT,
phono MM – RCA, phono MC – RCA, power amplifier input – RCA
Passive preamplifier – RCA
500 mV – universal inputs and separated CD/DAC inputs, 500 mV – XLR input,
3 mV – MM input, 0.2 mV – MC input, 0.500 V – power amplifiers
100 kΩ; universal and CD / DAC inputs, 22 kΩ XLR, 47 kΩ MM,
100 Ω MC, 47 kΩ power amplifiers
controlled by means of a "Blue Velvet" step motor manufactured by the Alps company
2 x toroid, each with power of 500 VA
8 x 12 000 uF – Nippon Chemi-Con
protection against speaker short-circuits and appearance of static voltage at the output
RC5 code (volume)
STATIC 40 VA / PEAK 1200 VA
19 kg
430 x 102 x 338 mm
24 months
EN