Soundastic Ultimate Notice De Montage Et D'utilisation page 16

1. Set the POWER switch to the OFF position.
2. Turn the VOLUME (speaker volume adjustment) potentiometer
to its extreme left position.
3. Connect the speaker column located on the right to the termi-
nal marked R, and the one on the left to the terminal marked
L. Tighten the terminal nuts (does not apply to banana connec-
tors) manually, without using any additional tools.
The amplifier is compatible with speakers with
impedance of 4 Ω and more.
J
R
Fig. 3. Connection of the speakers
16
4. Connect the sound sources in any order
We recommend using high quality interconnects and speaker cabling
in order to ensure the highest quality of the sounds played back.
A separate input designated as CD/DAC is recommended for the
user of interconnects that feature large plug diameters. This input
has a lower capacity than the others and ensures better quality of
J
sound reproduction.
The input designated as XLR is intended for working with sound
sources that have a compatible output.
5. Connect the power supply cable to the amplifier, making sure
that the power supply plug is pushed to the end of the power
supply socket and constitutes a reliable connection.
L
It is allowed to use power supply cables of any company, provided
that they meet all the safety requirements and feature appropria-
te safety certifications (markings).
EN
Fig. 4. Sound sources