Panasonic CT-32HL44 Manuel D'utilisation page 26

I M O
CON ENUS PERATION
SET UP (cont.)
• C2 to C4 - For other modes of video related information.
• T1 to T4 - For program guide and other information to be
displayed, when available. (Blocks a large portion of the
picture on the television screen).
Note: C1 mode is recommended for viewing Closed Captions.
OTHER ADJ.
Highlight OTHER ADJ. and press VOL
menu field.
Note: While sub sub-menu features are highlighted, press
VOL to adjust or activate.
MODE
AUTO PROGRAM
MANUAL PROGRAM
.
OTHER ADJ AUTO POWER ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS
PRESS ACTION TO RETURN
• MODE - To select TV (antenna) or CABLE mode
depending on the signal source.
• AUTO PROGRAM - To automatically program all
channels with a signal.
• MANUAL PROGRAM - To manually add or delete
channels.
• AUTO POWER ON - Select SET to power up the TV at
the same time as the Cable box or other components or
select OFF. When this feature is On, Timer functions will
be disabled.
• CHAN BANNER - Select ON to display onscreen banner
when changing channels.
• GEOMAGNETIC CORR -
adjust discoloration of the picture due to earth's
magnetic field in the area.
Procedure
• Press VOL to display adjustment menu.
• Press VOL or VOL
picture.
SET UP
MODE CABLE
AUTO PROGRAM
MANUAL PROGRAM
. AUTO POWER ON OFF
OTHER ADJ
ON
CHAN BANNER
GEOMAGNETIC CORR
PRESS FOR MORE
PRESS ACTION TO RETURN
• TILT CORRECTION -
the tilt of the picture due to earth's magnetic field in
the area.
Procedure
• Press VOL to display adjustment menu.
• Press VOL or VOL
SET UP
OTHER ADJ.
PRESS ACTION TO RETURN
24
to enter sub sub-
SET UP
CABLE
OFF
ON
FOR MORE
This feature is used to
to adjust discoloration in
GEOMAGNETIC CORRECTION
0 - - - - - - - - - - - - - - - - - - l
K
TO ADJUST
PRESS ACTION TO EXIT
This feature is used to adjust
to adjust picture tilt.
TILT CORRECTION
0
K
TO ADJUST
PRESS ACTION
TO EXIT
• IMAGE SHIFT - This feature prevents the image
retention associated with viewing a fixed image for a
long period of time. When this feature is selected (ON),
the image is shifted up/down, left/right in small
increments at turn ON, when changing channels or when
the fixed image is left On for a long time. Selecting ON is
recommended for this feature.