D- USING YOUR PRODUCT
D- USING YOUR PRODUCT
Using digital thermostat
For Dixell Thermostat;
For Elstat Thermostat;
EN
Ensures manuel defrost of the product.
Temperature is increased by pressing this but-
ton after pressing set button.
Temperature is decreased by pressing this
button after pressing set button.
It allows setting the cooler temperature. It is
activated when set button is pressed for 2-3
seconds.
It allows setting the cooler temperature. It is
activated when set button is pressed for 2-3
seconds.
Temperature is increased by pressing this but-
ton after pressing set button.
Ensures manuel defrost of the product.
Temperature is decreased by pressing this
button after pressing set button.
48
D- USING YOUR PRODUCT
Loading foodstuff to your product
You can load your foodstuff as permitted in this manual after your product reaches to desired temperature at
empty state. (If your product is a thermometer installed model, you can control internal temperature of your
product from here.)
CAUTION!
Before loading your storage cabinet with foodstuff, run your cooler empty for three (3) hours.
Do not place products, which are dangerous to be cooled down, inside you product
Leave a gap of at least two (2) cm between the top and the product you load for ensuring air circulation.
Do not load your product with food over the loading line.
49
EN