Kicker IQ Série Guide De Démarrage Rapide page 8

8
TWEEQ will scan and identify all
connected amplifiers KICKER has
support for multi-amp installations using
the IQI accessory You may toggle
between amps from the 'HOME' screen
Choose to bridge the channels if
both channels are used to drive a
common load Turn the FADER ON if
you are running two sets of inputs to
the amplifier Turn the FADER OFF if
you want to drive all channels from a
single stereo input For example, turn
the FADER ON if you are only using
AMP 1 as your input source Select the
input source for the subwoofer signal, if
applicable