Terminal Settings - Soehnle Professional 7710 Mode D'emploi

Terminal settings

In "Terminal" setting mode you will find the following request and setting options.
Version
AZG software version
AZG applications software
AZG serial number
CPU board serial number
Display
Backlight luminosity setting
Contrast
Language
Decimal separator
Thousand separator
Keypad
Keypad keylock
Key tone selection
Acknowledgement tone
Date/time
Time
Date
Date format
Display only
Display only
Display only
Display only
Input in percent via the numerical keypad
0% is dark, 100% is full luminosity.
Factory setting: 80%
Contrast setting, input in percent via the numerical keypad
1% is lowest contrast, 100% is full contrast.
Factory setting: 50%
Language:
German/English/French
Comma, point or none
Factory setting: comma
Comma, point or none
Factory setting: comma
Individual, several or all keys on the keypad can be
locked. By pressing the key that is to be locked, the status
of the key can be changed from open to locked and vice versa.
To accept, press the Print key for 3 seconds.
"Off" or "on". Confirmation tone when a key is pressed.
Factory setting: "off"
selection "off" or "on"
Acknowledgement tone when a function has been executed.
Factory setting: "off"
Input via the numerical keypad. Press Print key to start clock count
down
Input via the numerical keypad
Selection European or imperial date
Factory setting: European
English
3 3 7 7