Technical Data; Additional Technical Information; Installing The Scale; Operating Concept - Soehnle Professional 7710 Mode D'emploi

Technical data

Weighing range:
Resolution:
Minimum load:
Maximum bed weight:
Approval number:
Ambient temperature for operation: -10°C ... +40°C, rapid changes in temperature, e.g. caused by
Storage temperature:
Humidity:
Mains operation:
Transport conditions:
Membrane keyboard:
Organisation data memory:
Display:
Memory capacity:
I/O ports:
Material:

Additional technical information

Diagrams, lists of spare parts, and setting instructions can be requested through the manufacturer's
Customer Service.

Installing the scale

The scale is designed only for use on level floors. For installation sites in Germany, this conditions is
satisfied if the floors comply with the tolerances permitted for surface-ready floors in accordance with
DIN 18202, Table 3, Line 4.
For other countries the respective applicable national standards should be taken as a basis.

Operating concept

The appliance is operated by means of the keypad. The keys are assigned to different functions in diffe-
rent modes.
500 kg
up to 300 kg e = 100 g / from 300 kg e = 200 g
2 kg
250 kg
D06-09-08-PTB (0102)
a cold draught, can adversely affect the measurement results.
-40°C ... +70°C
20% - 85% relative humidity, not condensing
100 or 230 V / 50-60 Hz, 400 mA
the appliance should only be transported in the original packaging.
The storage temperature must be maintained; avoid shaking and
shocks.
19 keys, 1 function key
4 memories, alphanumeric input via the numerical keypad
dot matrix 240 x 64 pixels, dimmable backlighting
fixed value memory for 400 fixed values, valid for all programs,
no-volt protected, optional alibi memory for 2 million inputs.
1 x RS 232, additional ports optional, including buses.
programming terminal:
Weighing machine:
housing in stainless steel
aluminium
English
3 3 3 3