Technical Data; Guarantee - CTC BS 1255 Mode D'emploi

Cleaning and storage
Cleaning
• Pull the plug out of the socket before cleaning!
• Clean the casing with a dry cloth.
• Cleaning of the dust container and fi lters is described
in detail under the „Filters" section.
Storage
• Move the handle to a vertical position.
• Wind the cable completely.
Troubleshooting
Weak Suction
• Even if the MAX mark on the dust container has not
yet been reached the suction power of your vacuum
cleaner may deteriorate. Please clean the fi lters as
described in the operating instructions under "Filters".
• Depending on the conditions of use, for example
vacuuming fi ne dust, this may also be necessary after
a shorter time.
• If the motor suddenly stops during operation this may
indicate that the fi lters are blocked.
Possible Cause
The excess temperature protection of the motor has been
activated. Switch the device off and allow it to cool down
for approximately 20 min. Clean the fi lters in the meanti-
me. Continue to use the vacuum only with dry fi lters.
Foreign Bodies
• Foreign bodies in the suction system can be removed
more easily if you remove the hose from the hose
connection (2). Please use a screwdriver to help you.
• When you have removed the foreign bodies please
reconnect the hose.

Technical Data

Model: ................................................................. BS 1255
Power supply: ................................................230 V, 50 Hz
Power consumption:
P :................................................................. 1300 W
nom.
P :................................................................. 1800 W
max.
Protection class: .............................................................. ΙΙ
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
05-BS 1255 33

Guarantee

The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or, at
our discretion, by replacing it. The guarantee services do
not entail an extension of the life of the guarantee nor do
they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replacement
or repair will be carried out.
If you wish to make a claim under the guarantee please
return the entire machine in the original packaging to
your dealer together with the receipt.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
Defects to consumables or parts subject to wearing
(e.g. motor pistons, kneading blades, drive shafts, spare
remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said
parts are not covered by the guarantee and hence are to
be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried
by the competent dealer or repair service against the
payment of the ensuing costs.
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will no
longer use to the collection points provided for their
disposal.
This helps avoid the potential effects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.
33
07.02.2006, 14:35:35 Uhr