Ezviz DB1 Guide Rapide page 8

• If you have mechanical chime installed in your home, install the power kit and doorbell.
• If you have electronic chime installed in your home, refer to its own manual to install the power kit, and install
the doorbell.
• If no chime is installed, skip power kit installation, install the doorbell and follow the
1
Shut off the electricity at the breaker that controls
doorbell's circuit.
3
Remove the cover from your mechanical chime.
Power Kit Installation
2
Insert one end of the wire harness the power kit.
4
Remove the existing chime wires in the terminals
named TRANS and FRONT.
3
Option B
in page 5.
REAR
REAR TRANSF RONT