Ezviz DB1 Guide Rapide page 12

8
Fix the doorbell to the mounting plate by inserting the
doorbell screws.
Doorbell Screw
Doorbell is powered on when its indicator flashes blue quickly. If not, make sure your electricity is off and check the
wiring. If yes, proceed to doorbell setup.
10
Add to EZVIZ app.
- Connect your mobile phone to Wi-Fi.
- Download and install the EZVIZ app by searching "EZVIZ" in App Store or Google Play
- Register an EZVIZ user account following the start-up wizard and log in.
- On the Home screen, tap "+" on the upper-right corner to go to the scan QR code page.
- Scan the QR code on the device or the cover of this manual when the indicator flashes blue.
- Follow the app wizard to finish Wi-Fi configuration.
If you want to change your doorbell's Wi-Fi, press and hold the reset button for 5s and repeat this part.
9
Restore the electricity at the breaker.
Doorbell Setup
7
.
TM