Operation; When You Are Finished - ECX Torment Manuel D'utilisation

1/18-scale 4wd short course truck
Masquer les pouces Voir aussi pour Torment:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
• ALWAYS turn on your transmitter before you turn on the
receiver in the vehicle. Always turn off the receiver before
turning your transmitter off.
• ALWAYS operate your vehicle in a wide open area. Operating
the vehicle in a small space or indoors can cause overheating
at low speeds. Operating at low speed increases heat in the
electronic speed control (ESC). Overheating can damage the
vehicle and failure may result.
Steering Dual Rate
• If the vehicle turns too sharply and/or spins out easily, reduce
the steering dual rate (turn the knob counterclockwise).
• For sharper or additional steering, increase the steering dual
rate (turn the knob clockwise).
Throttle Operation
• Pull the transmitter trigger to increase throttle.
• Push the trigger to apply brake or reverse.
IMPORTANT: The slower the vehicle is moving, the quicker it
will change from forward to reverse.
1. Power off the vehicle.
3. Remove the battery from the vehicle.
8
TORMENT

OPERATION

WHEN YOU ARE FINISHED

2. Power off the transmitter.
OFF
4. Disconnect the battery from the ESC/Receiver unit.
4WD
4WD

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ecx01001i

Table des Matières