Makita HR2652 Manuel D'instruction page 13

Replacing filter of dust case
1. Remove the dust case while pressing down the
lever of the dust case.
► 1. Lever
2. Insert the flat-blade screwdriver into the slots of
the filter cover to remove the filter case and filter.
1
► 1. Flat-blade screwdriver 2. Filter case
3.
Remove the filter from the filter case.
► 1. Filter 2. Filter case
4.
attach them to the dust case aligning the protrusion on
the filter case with the groove on the dust case.
1
► 1. Protrusion 2. Groove
5.
it to the tool.
Replacing sealing cap
If the sealing cap is worn out, the performance of the
dust collection decreases. Replace it if it's worn out.
Remove the sealing cap, and then attach a new one
with its protrusion facing upward.
2
► 1. Protrusion 2. Sealing cap
1
2
13 ENGLISH
Attach a new filter to the filter case, and then
1
2
Close the cover of the dust case, and then attach
1
2