Delete A Device; Fix A Key; Add A Function; Add An Activity - Philips SRU9600 Mode D'emploi

6

Delete a Device

You can delete a programmed device from your
remote control.
1
Select the option Delete a device in the Setup menu and press
2
Select the device you want to delete.
3
Confirm you want to delete the device.
The device is deleted.
The deleted device is available again in list of devices that you can add.
Note Keys of the deleted device that are used elsewhere, e.g. in an activity or
the volume keys you copied, will be deleted as well.
Check the activities you programmed and Volume keys for your devices and
reprogram them if necessary.

Fix a Key

If a hard key, touch screen key or extra function is
not working properly with your device, you can
learn the key from your original remote control in
your SRU9600. You can learn up to 200 keys.
1
Select the option Fix a key in the Setup menu
and press
2
Select the device for which you want to fix a
key.
3
Confirm you have a working original remote
control available to learn from.
4
Select the hard key, touch screen key or extra
function you want to fix.
Extra functions can be selected by pressing the
Jog Mode
key, selecting the function with the
rotary wheel
5
Follow the instructions on the remote control.
The key is learned and fixed.
Note Fixing a key overwrites the key's data that was stored in your SRU9600.

Add a Function

You can add extra functions to your SRU9600.
1
Select the option Add a function in the Setup
menu and press
2
Select the device you want to add a function to.
3
Select the label you want to use for the extra function.
4
Learn the function from your original remote.
The extra function is added to your remote control.You can access the extra
functions by pressing

Add an Activity

You can add activities to your SRU9600.
An activity consists of several key presses that will
be sent out by your remote control with just one key press.
By default the SRU9600 inserts a delay of 300ms between every key press
to make sure your devices are responding correctly to the IR signals.You can
overwrite this default delay.
If one of your devices needs a longer delay before receiving the next IR
signal, you can insert a delay of 3 seconds.
If an activity needs no delay between the different key presses, e.g. turning
up the volume, you can add the option 'no delay'.
1
Select the option Add an activity in the Setup menu and press
2
Select the label you want to use for the activity.
3
Follow the instructions on the remote control.
.
OK
and pressing .
.
.
.
2-5 cm
Best
position
of the
SRU9600 and
your original
remote control
.