Operating Features - Urmet 1092/278HZ Manuel D'utilisation

4. Connect the video output to the selected terminal device.
5. Connect the power JACK to the power supply unit and power-on the camera
6. Adjust lens angle, slant and rotation, in order to capture correctly the selected images
7. Use the menu button inside the minidome (see following paragraph)
8. Fix the protection dome to the minidome base, by screwing the three previously removed screws

OPERATING FEATURES

MENU setting
TO SELECT THE VIDEO OUTPUT
The 1092/278HZ camera may use 3 different video outputs, which are on the same BNC connector:
•
High-definition 1080P AHD (Analog High Definition) video output
DS1092-239
360°
UNSCREW THE PLUG TO MAKE
THE CABLE COME OUT
ATTENTION.
reflections on the image, it's
Max 75°
strongly recommended not to
overtake the indicated slant.
360°
UP
LEFT
SET
DOWN
To avoid
RIGHT
21