Operating Features - Urmet 1096 Manuel D'utilisation

INSTALLATION
1 Make sure that no units are powered before starting the installation procedure.
2 Position the bracket to frame the required picture and fasten it.
3 Connect the video output to the utility.
4 Power the camera.

OPERATING FEATURES

The camera may be operated only using the UTC controls available on the DVR/HDVR of the Urmet
catalogue implementing the function. Refer to the complete product documentation on the Urmet website to
check for the list of available devices.
These controls can be used to access the OSD menu.
Refer to the respective product manuals for using the controls.
PIR ALARMS
The camera is supplied of a PIR sensor that can send alarms for presence of people to be sent to the
compatible DVR/HVR of the Urmet catalogue.
For major details about how to set the PIR Camera to HVR please refer to HVR User Manual PIR section.
MENU USE
The camera uses a multi-level menu that allows to enable/disable or change camera settings.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed, the access first screen will be displayed.
Once the item has been selected, the parameter can be changed choosing among the available options.
By selecting the item associated to the symbols
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item EXIT→ SAVE&END
and press the central button.
To reactivate the default values select the item EXIT→ RESET and press the central button.
DS1096-111A
or it is possible to access to the next submenu,
15