Publicité
Setup card
This card contains unique configuration codes.
EN
You will need them to reconfigure your Camera.
Keep the card in a safe place. Do not throw it
away.
A.
SETUP QR code (black): During the product setup
or Wi-Fi configuration, show the black QR code to
the camera only when required by the App. Until the
floodlight starts to blink.
B.
RESET QR code (red): To perform a factory reset,
show the red QR code to the camera. The floodlight
will make five fast blinks twice to confirm the
operation. All the data and configuration will be lost.
When showing a QR code to the Camera, keep it at
a distance of 30 cm / 1 ft. Make sure there is enough
ambient light for the camera to read the code.
It may not work at night.
36
During the product setup, show this black QR
code to the camera only when required by
the App. Until the floodlight starts to blink.
30cm
1 ft.
Smart Outdoor Camera
To perform a factory reset, show this red QR
code to the camera.
The floodlight will make five fast blinks twice
to confirm the operation.
All the data and configuration will be lost.
Security code for product setup.
Keep card in a safe place.
Do not throw away.
30cm
1 ft.
QR-card-V5
Publicité
