Accessories And Spare Parts; Maintenance And Cleaning - Würth EVAPO MAT Traduction Des Instructions De Service D'origine

Odour removal in interior spaces using the
EVAPO
®
fresh
▸
Place the EVAPO
®
interior space and switch on via the On/Off
switch [12].
▸
Close doors and windows and leave the interior
space.
When the status indicator [5] changes from
3
green to red, the process is complete.
The EVAPO MAT switches off automatically.
®
3
▸
Then open all doors and windows and ventilate
the interior space for about 10 - 20 minutes.

Maintenance and cleaning

WARNING !
Danger of electric current.
Carry out maintenance and cleaning
¾
work on the device only when the
mains plug has been removed.
Risk of injuries or property damage due
to improper actions.
Do not open the device.
¾
The device must only be opened by
¾
Würth masterService.
Observe the relevant safety and
¾
accident prevention regulations
during all maintenance and servicing
work.
Note
Clean and empty the EVAPO
every use.
▸
Pull out the mains plug from the EVAPO
▸
Remove and dispose of empty can receptable.
▸
Fill approx. 100 ml water into the can receptacle,
lightly shake the EVAPO
water.
▸
Protect On/Off switch [12] and connection
socket [1] against water splashes.
▸
Clean the EVAPO
®
On/Off switch with a dry, non-abrasive cloth.
▸
Inspect the mains cable and plug for damage at
regular intervals.
MAT in the middle of the
CAUTION !
MAT after
®
®
MAT, then drain out the
®
MAT, power cable, plug and

Accessories and Spare Parts

If in spite of careful manufacturing and test proce-
dures, the EVAPO
Würth masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
broken and unserviceable electric tools must be
collected separately and submitted to an environ-
mentally sound recycling facility. Ensure that your
MAT. used device is returned to your dealer or obtain
information about a local authorised collection and
disposal system. Ignoring this EU directive can have
potential effects on the environment and your health!
MAT becomes faulty, a repair by
®
Warranty
Disposal
Do not dispose of this device in house-
hold waste. According to European
Directive 2012/19/EU on waste
electrical and electronic equipment and
its implementation in national law,
11