Counting Pieces; Counting Procedure; Entry Of The Known Average Piece Weight; Plu Memory Storage - Scale House NCL3K Manuel D'utilisation

5.5 COUNTING PIECES

Through the reference function it's possible to use the scale as a piece counter.

5.5.1 COUNTING PROCEDURE

The operations to be carried out are the following:
1) Place the empty container on the scale and press TARE to tare it.
2) Check that the zero is on the display
3) Type the quantity of pieces chosen for the SAMPLE with the keyboard; to change the entered value, one should
first press the key C key, then input the new number. If one has not input the number for 3 seconds, one can input
the new number directly without pressing the key C key.
4) Put the weight on the scale and press PCS when the weight is stable, the indicator will calculate the Average
Piece Weight (APW). After a few instants the display will indicate the quantity selected put on the platform and the
"Average Piece Weight" display indicates the calculated value.
5) Add the rest of the items to count in the container and whose value will appear on the display.
6) Unload the scale; the APW will remain stored in memory for the next counting of similar pieces, without having to
repeat the REFERENCE operation.
7) To cancel or to carry out a new reference operation, repeat the operations as describe in point 1).

5.5.2 ENTRY OF THE KNOWN AVERAGE PIECE WEIGHT

Set the decimals' number of the Average Piece Weight (APW) by pressing C key to clear the value on the display and
by pressing 0 key several time to select the available decimals' number: 0.0000, 0.000, 0.00.
To enter the known Average Piece Weight (APW), type the value with the keyboard; to change the entered value, one
should first press the key C key, then input the new number. If one has not input the number for 3 seconds, one can
input the new number directly without pressing the key C key.
The "Average Piece Weight" display indicates the entered value and the "COUNT" display will already show the
number of pieces on the scale.
With four decimals number, the Average Piece Weight value can not be entered over or equal 2 kg.
The operation can be made with a loaded or unloaded platform.
In any case, the entry of a new average piece weight cancels and substitutes the previous one.

5.5.3 PLU MEMORY STORAGE

ENTRY / MODIFICATION
To enter or modify a stored PLU:
- Press the SAVE-MC key.
- Press any key from M1 to M8 to select the memory storage to be entered or modified, the relative memory storage
will be displayed on the unit weight window.
- Set or cancel the average piece weight by pressing the C key.
- Press the SAVE-MC key to confirm: the average piece weight will be linked to the selected PLU.
SELECTION
To select a stored PLU just press the relative key from M1 to M8.
The average piece weight will be automatically enabled.

5.5.4 NOTES

a. When the "LOW-APW" symbol is on, it means the Average Piece Weight is less than 80% of division. You still can
count but the counting may be inaccurate.
b. When the "LOW-PCS" symbol is on, it means the weight of sample is not enough at all. Please re-sample.
8