Putting Into Operation; Important; Steam Ironing - Termozeta Milordino Mode D'emploi

RECOMMENDATION
If water in your area is particularly calcareous, it is advisable to use
distilled water.

PUTTING INTO OPERATION

• Make sure the steam control dial (4) is in the "0" position (dry
ironing).
• Completely unroll the power cord (7), put the iron
in a vertical position and connect the plug to the
power outlet.
• The power indicator (5) turns on and will turn off
when the appliance is disconnected from the
power supply.
• With the temperature control knob (8) select the
temperature which is most suitable for the type
of fabric to be ironed.
• The thermostat indicator (6) turns on and will then turn off when the
soleplate reaches the selected temperature. The iron is now ready
for use.

IMPORTANT

• Before and during use make sure the work surface is stable and
heat resistant.
• Never leave the iron unattended when it is connected to the power
outlet.
• Do not use the iron if it has been dropped, if there are signs of
damage or if water leaks from the soleplate.
RECOMMENDATIONS
• First iron more delicate fabrics which require low temperature and
then the more resistant ones which require higher temperatures.
• Before ironing pass the iron over a small hidden area of your item of
linen to make sure the temperature selected is suitable for that type
of fabric.

STEAM IRONING

• Fill the tank with water.
• Choose the desired steam output by turning the steam control dial
(4).
ENGLISH
Fig.2
5 4
8 6