Battery Life Indicator; Battery Capacity; Battery Charging; Light Sensitivity Test - Tanda Clear Mode D'emploi

Battery life indicator

EN

Battery capacity:

Indicator lights illuminate to show 100% - 25% battery
capacity when device is turned on.

Battery charging:

Each indicator light flashes one by one from left to right
when charging.

Light sensitivity test

Follow these instructions to see if you are sensitive to light:
1.
Press the gray power button.
14
2.
Place the device near the area that you intend to
treat that is free from a blemish. Hold the device in
place for one 2 - minute treatment cycle or until you
hear a beep.
3.
Wait 24 hours. You should NOT experience any
adverse reaction during the next 24 hours.
4.
An adverse reaction is pain or discomfort in the
treatment area or any prolonged skin redness.
Device Set - up
If this is your first time using the device, be sure to
conduct the Light Sensitivity Test
described below.
1.
Unpack the device and all the
accessories.
2.
Remove the plastic battery tab at the bottom of the
unit near the DC input receptacle prior to charging
the unit.